WiFi Installation & Internet Setup Perth

How Do I Get Internet Installed at My Home in Perth?

To get internet installed in Perth, order a plan with a provider, who arranges an NBN technician if your home needs one. Once the service is active, connect your modem or router to the NBN box or wall socket, then set up your WiFi name, password and devices. Geeks IT Perth does this modem and WiFi setup onsite.

Internet Installation in Perth: Who Does Each Step?

1. Order a plan: Choose a plan with an internet provider. Your provider, not Geeks IT Perth, arranges any NBN technician visit your home needs.
2. Connect the equipment: Once the service is active, connect your modem or router to the NBN box or wall socket.
3. Set up WiFi: Set your WiFi name and password, then connect your devices.

Geeks IT Perth can help with steps 2 and 3 at $205/hour onsite, or at $125/hour remotely once your connection is working. Both have a one-hour minimum and no call-out fee. See our pricing or book a technician. If the connection drops out or runs slowly after setup, read our guide to fixing WiFi and NBN problems in Perth.

How Does WiFi Installation Work in Perth, and What Does It Cost?

A WiFi installation from Geeks IT Perth covers these steps:

1. Connect your modem-router to your NBN or internet service.
2. Set a secure network name and password.
3. Connect your phones, laptops, TVs and printers.
4. Test the signal in every room you use.
5. Add a mesh WiFi system or extender where one router doesn't reach.

Perth homes often have double-brick walls, and many single-storey homes run long from front to back, so rear rooms and granny flats can end up with weak signal. That is where a mesh system or a second access point helps.

We can recommend suitable hardware, or set up a router or mesh kit you already own, and we place the router centrally and away from thick walls and metal for the best signal.

For offices, shops and clinics, we also set up business WiFi, which you can read about on our office network setup page.

Already have WiFi that keeps dropping out? Read our guide to fixing slow internet, dropouts and dead zones in Perth.

What it costs

We charge by the hour, so the cost depends on the size of the place and what needs setting up (see our pricing page):

• Onsite WiFi installation: $205/hour
• Remote help (router settings, device connections, password changes): $125/hour
• One-hour minimum, no call-out fee

Call Geeks IT Perth on 08 6385 7940 and tell us about your property and current setup, and we'll talk through what's likely to be involved. You can also book online.

How much does it cost to have WiFi installed in Perth?

We charge $205 an hour onsite and $125 an hour for remote help, with a one-hour minimum and no call-out fee. The total depends on the size of your home or office and what needs to be set up, such as a router, extra access points or a guest network.

How do I install WiFi at home?

Connect your modem-router to your NBN connection: the NBN box on the wall for fibre-to-the-premises, the NBN cable box for HFC, the NBN connection device plugged into the phone socket for fibre-to-the-curb, the phone wall socket directly (using a VDSL2-compatible modem) for fibre-to-the-node, or the NBN box inside the home for Fixed Wireless. Then set a network name and a strong password. If you'd rather not do it yourself, we can set it up onsite or remotely.

Do you install WiFi for businesses?

Yes. For offices, shops and clinics across Perth we install business routers, wireless access points and a separate guest network, and we keep staff devices apart from personal phones. The Office Network Setup page on our site has the full detail.

Can you fix weak WiFi or constant dropouts?

Yes. We check the modem, router placement and your devices, then set up the network to suit your space. Our blog guide to WiFi and NBN dropouts, slow internet and dead zones in Perth covers the common causes.